Baker Hughes Panametrics oxy.IQ, Руководство пользователя

Страница: 43 / 56

oxy.IQ User’s Manual 35
Appendix D. Certification and safety statements
Appendix D. Certification and safety statements
The oxy.IQ is a highly reliable and cost-effective two-wire, loop-powered transmitter with a linearized 4 to 20 mA
output. It measures oxygen in ten ppm ranges and seven percentage ranges. All ranges are user-selectable. This
compact transmitter uses proven sensor technology to accurately measure oxygen in a variety of gases, even in
hazardous environments.
When installing this apparatus, the following requirements must be met:
• The system is covered by the certificate numbers FM14ATEX0032X and IECEx FMG 14.00016X as shown on the
labels on the following page. The system temperature code is T4 in the temperature range of -20 to 60 °C.
• The apparatus should be de-energized before servicing.
• Installation shall be in accordance with the installation instructions and the National Electrical Code® ANSI/NFPA
70, the Canadian Electrical Code C22.1, or IEC/EN 60079-14, as applicable.
• Equipment is of type Intrinsically Safe and complies with: EN 60079-0:2012, EN 60079-11:2012, IEC 60079-0:2011, IEC
60079-11:2011, IEC 60529:1992, C22.2 No.1010.1:2004, CAN/ CSA-E60079-0:2011, CAN/CSA-E60079-11:2011,
C22.2.60529:2005, FM Class 3600:2011, FM Class 3610:2010, FM Class 3810:2005, ANSI/ ISA 61010-1:2004 Ed.2, ANSI/ ISA
60079-0:2009 Ed.5, ANSI/ ISA 60079-11:2009 Ed.5
• The product contains no exposed parts which produce surface temperature infrared, electromagnetic ionizing,
or non-electrical dangers.
• The product must not be subjected to mechanical or thermal stresses in excess of those permitted in the
certification documentation and the instruction manual.
• The product cannot be repaired by the user; it must be replaced by an equivalent certified product. Repairs
should only be carried out by the manufacturer or by an approved repairer. Please contact Panametrics
Customer Support Center for repair, maintenance or replacement of the product. For oxygen sensor
replacements, please contact Panametrics.
oxy.IQ Panametrics
1100 Technology Park Drive
Billerica, MA 01821
oxy.IQ safety manual
MODEL DWG NO. 714-1344 REV. C TITLE
Rev REL/ECO No. Drawn Date Checked Date Approved Date
A RN 7786 J. Ferro 1/8/15 PMH 1/8/15 J. Ferro 1/8/15
B ECO-09423 CD SMART 1/19/16 CD SMART 1/19/16 G. KOZINSKI 1/19/16
C ECO-157348404 CD SMART 1/5/17 J. FERRO 1/5/17 J. FERRO 1/5/17