Baker Hughes Panametrics oxy.IQ, Руководство пользователя

Страница: 17 / 56

oxy.IQ User’s Manual 9
Chapter 3. Initial Setup and Operation
Chapter 3. Initial Setup and Operation
3.1 The oxy.IQ Display and Keypad
All programming of the oxy.IQ is done via the front panel keypad and display, as illustrated below.
Figure 7: oxy.IQ Display and Keypad
The front panel components perform the following functions:
• Display - Data measurements and the programming menus and options are shown on the LCD display screen.
• Enter - While in measurement mode, press this key to enter the Main Menu . While in the Main Menu , press
this key to save an entry and advance to the next screen.
• Cancel - While in the Main Menu , press this key to cancel an entry and to return to the previous screen.
• and Keys - In the Main Menu , use these keys to move the cursor between rows one row at a time in the
direction indicated.
3.2 The oxy.IQ Menu Map
As an aid in navigating through the main menu, a complete menu map of the user program is shown in figure 16.
Refer to this figure as needed while programming the oxy.IQ.
• The oxy.IQ main menu consists of the following submenus:
• Calibration menu (no passcode required)
• Display menu (no passcode required)
• Output menu (no passcode required)
• Service menu (factory service passcode required)
To enter the Main Menu from normal display mode, simply press the Enter key at any time. To leave the Main
Menu and return to measurement mode, press the Cancel key.
Note: Depending on how deep you are in the menu structure, it may be necessary to press the Cancel key
more than once to return all the way back to measurement mode.
Down Arrow
Up Arrow
Display
Enter Cancel