background image

oxy.IQ User’s Manual

47

Warranty

Warranty

Each instrument manufactured by Panametrics is warranted to be free from defects in material and workmanship. 

Liability under this warranty is limited to restoring the instrument to normal operation or replacing the instrument, at 

the sole discretion of Panametrics. Fuses and batteries are specifically excluded from any liability. This warranty is 

effective from the date of delivery to the original purchaser. If Panametrics determines that the equipment was 

defective, the warranty period is:

12 months from delivery for electronic or mechanical failures

12 months from delivery for sensor shelf life

If Panametrics determines that the equipment was damaged by misuse, improper installation, the use of 

unauthorized replacement parts, or operating conditions outside the guidelines specified by Panametrics, the repairs 

are not covered under this warranty.

The warranties set forth herein are exclusive and are in lieu of all other warranties whether 

statutory, express or implied (including warranties or merchantability and fitness for a particular 

purpose, and warranties arising from course of dealing or usage or trade).

Return Policy

If a Panametrics instrument malfunctions within the warranty period, the following procedure must be completed:

1.

Notify Panametrics, giving full details of the problem, and provide the model number and serial number of the 

instrument. If the nature of the problem indicates the need for factory service, Panametrics will issue a RETURN 

AUTHORIZATION NUMBER (RAN), and shipping instructions for the return of the instrument to a service center will 

be provided.

2.

If Panametrics instructs you to send your instrument to a service center, it must be shipped prepaid to the 

authorized repair station indicated in the shipping instructions.

3.

Upon receipt, Panametrics will evaluate the instrument to determine the cause of the malfunction.

Then, one of the following courses of action will then be taken:

If the damage is covered under the terms of the warranty, the instrument will be repaired at no cost to the owner 

and returned.

If Panametrics determines that the damage is not covered under the terms of the warranty, or if the warranty has 

expired, an estimate for the cost of the repairs at standard rates will be provided. Upon receipt of the owner’s 

approval to proceed, the instrument will be repaired and returned.

Содержание Panametrics oxy.IQ

























































Отзывы: