Bailey C-I-CV42C, Инструкция

Страница: 157 / 214

PR24 - 4 WBPEEUI220771A0
Procedure
□
6. Slide the PEP out of the front of the cabinet. Use caution as
the PEP weighs approximately 23 kg (50 lbs).
□
7. Use the bladed screwdriver to remove the four screws that
secure the IIMKM02A module to the PEP (Fig.
PR24-4 ). Be sure
not to lose the two nonconductive washers for each standoff
□
8. Remove the cover from the top of the PEP by using the
bladed screwdriver to remove the nine screws (Fig.
PR24-5 ).
□
9. Disconnect the DC distribution board connector.
□
10. Label and disconnect the wires between the power supply
and the incoming AC power.
□
11. Use the bladed screwdriver to remove the four screws that
hold the power supply to the center support wall of the PEP.
Figure PR24-3. Environmental Model PEP Removal
T01484A
SCREWS (4)
POWER ENTRY
PANEL
SCREWS (2)