Baileigh WR-84V-ATC, Руководство оператора

Страница: 33 / 56

31
31
10. Press the (ESC) key to return to the main operating screen.
11. Verify that the spindle and the table are clear and safe for operation. Press the (Start)
key to start the machining operation.
1X 999.000 Run
1Y 999.000 1S
1Z -99.000 Slow
F:3600 100%
Note: The coordinates for the X, Y, and Z axis will be the values that the spindle is
at and will be changing as the head moves to complete the program.
The “F” rate (travel speed) will also change as the program is running.
12. The spindle will start and come to full (as set) rpm and the operating screen will display the
operating information as the program is running.
During the operation of a program, the travel speed may be changed in 10% increments from
0% (stopped) to 120% by pressing the or the keys.
13. The spindle rpm may be changed by pressing the combination of the + , or the
+ keys. This will change the spindle speed from 0S stopped, up to 7S, maximum
spindle rpm.
14. When the program is completed, pressing the OK key will display the program process
information. This will be the file name and the time in hours, minutes and seconds in which it
took to run the program.
15.
The head will move to the “Park” position as set from the factory or as set by the operator
following the instructions in the NK105 manual. The operational key may be used to move
the head to a location which provides the safest and easiest access to the material to be
removed or repositioned, or for a tool change.