Baileigh WR-84V-ATC, Руководство оператора

Страница: 47 / 56

45
45
•
Clean the cutters.
•
Generally inspect the machine for damage and loose or worn parts.
•
Check the dust extraction system for blockages and any large scrap that could cause
blockages.
•
Check the screen on the inlet of the vacuum pump for debris.
Monthly Maintenance
•
Tighten any loose bolts, nuts, or screws on the machine.
•
Inspect the timing belts for wear (every 3 months).
•
Grease the
gear racks for the “X” & “Y” axes. Use a general purpose grease.
Air Pressure System Maintenance
1. The primary inlet filter should be cleaned daily or
before the start of each work shift.
2. The inlet (F1 and F2) and exhaust (F3) filters inside
the vacuum pump needs to be cleaned weekly
depending upon usage to keep dust from entering
the pump.
3. General cleaning of the vacuum pump should be
done daily to weekly depending upon usage to
provide for full air flow in and around the entire
vacuum pump.
4. Use a brush and a shop vacuum to dislodge and
remove any dust and chips from the vacuum pump.
5. Remove the covers and clean each of the filter
chambers and fins to allow for full air flow.
6. Lubricate every three months. Only use the designated grease.