Baileigh TS-1248P, Руководство оператора

Страница: 71 / 104

67
67
3. Press Zero/Enter, 000.000 will appear on screen.
4. Press Zero/Enter to Zero the ABS setting. 0.000 will appear in the operating screen.
5. The ABS measurement is now set to zero and the screen is ready for operation.
Menu Function “Edit”
The “Edit” function will display the software version of the DRO.
1. Press the Menu/Return button.
2.
Press arrow button to move to “Edit” screen.
3. Press Zero/Enter, the current version of the DRO software will display. G1.1 is the version
now.
4. Press the Menu/Return button to return to the operating screen.
Menu Function “bAt”
The “bAt” function will display the current battery voltage.
1. Press the Menu/Return button.
2.
Press arrow button to move to “bAt” screen.
3. Press Zero/Enter, the current battery voltage will display.
4. Press the Menu/Return button to return to the operating screen.
Menu Function “tunE”
The “tunE” function will calibrate the sensor to the magnetic strip. See “Initial Calibration for
proper operation.
Menu Function “dir”
Th
e “dir” function will change the display to display either a positive or negative number. This
display change is not very noticeable as the counting direction does not change.
1. Press the Menu/Return button.
2.
Press arrow button to move to “dir” screen.
3. Press Zero/Enter, either PoS or nEG will display.
4. Press either the left or right arrow button to change between PoS or nEG.
5. Press Zero/Enter to set the direction and return to the operating screen.