Baileigh TS-1248P, Руководство оператора

Страница: 76 / 104

72
72
When the blade height handwheel is rotated, the
bevel gear turns the elevation leadscrew to
raise/lower the motor housing assembly.
Clean the bevel gear and elevation leadscrew (C)
and slide rails (D) with mineral spirits before
lubricating.
Lubricate the bevel gear and elevation leadscrew
and slide rails with lithium grease. Apply a dab
into the bevel gear teeth and around the elevation
leadscrew right next to where it goes into the
housing.
Move the blade height the full range of operation 2
– 3 times to spread the grease.
No other part of this table saw needs lubrication.
D
C