Baileigh TS-1248P, Руководство оператора

Страница: 34 / 104

30
30
Crosscut Blade Features

Best for cutting across the grain

60-80 teeth

Alternate top bevel tooth profile

Small hook angle and a shallow gullet
Combination Blade Features

Designed to cut both with and across grain

40-50 teeth

Alternate top bevel and flat, or alternate top bevel
and raker tooth profile

Teeth are arranged in groups

Gullets are small and shallow (similar to a cross-cut
blade), then large and deep (similar to a ripping
blade
Laminate Blade Features

Best for cutting plywood or veneer

40-80 teeth

Triple chip tooth profile

Very shallow gullet
Thin Kerf Blade
A blade with thinner kerf than a standard blade. Since the spreader/riving knife included with this
table saw is sized for standard blades, thin kerf blades cannot be used on this saw unless they
meet the Blade Requirements specified in this manual; otherwise, they will increase the risk of
kickback.