Baileigh TS-1248P, Руководство оператора

Страница: 40 / 104

36
36
Installing Pawls
1. Loosen the knob on top of the spreader, and
then remove the blade guard.
2. Slide the pin in the pawl block into the second
groove from the front of the spreader.
3. Press the button on the pawl block, and then
pivot the pawls down until they lock into place.
4. Install the blade guard onto the spreader and
secure with the top knob.
When to Use Blade Guard
The blade guard assembly MUST always be installed on the saw for all normal through cuts.
Operating the saw without the guard increases the risk of kickback or blade contact. If the blade
guard is removed for specific operations, immediately replace it after those operations are
complete.
When Not to Use Blade Guard
The blade guard cannot be used for any non- through cuts.
IMPORTANT: Whenever the blade guard cannot be used, the riving knife must be
installed.
Sometimes the blade guard or its components can get in the way when cutting very narrow
workpieces or other specialized cuts. Because the blade guard is provided to decrease your risk
of injury, it should not be used if it gets in the way of making a safe cut. Use good judgment!