manualshive.com logo in svg
background image

10

CUSTOMER MANUAL 

FRONT HUB MOTOR SYSTEM   

A special charger provided by BAFANG must be 
used to charge these batteries.

 

do not charge the battery for longer than 
the charging time listed in the Specification 
table.

 

do not bring electrical contacts together. 
do not destroy or disassemble the battery 
yourself. do not store or use the battery in 
humid places so as to avoid any danger.

 

When disposing of battery, ensure you 
respect regulations. do not immerse in fire 
or water.

 

When in use, the battery should be kept 
away from heat sources, high voltage power 
supplies and children. 

 

do not drop the battery.

 

When storing the battery for a long period, 
make sure it is charged to at least half its 
capacity, and charge it again three months 
later. do not wrap it with conductive mate-
rial, as to do so will cause damage due to 
direct contact between the metal and the 
battery. Store the battery in a dry place.

 

Keep the battery out of the reach of chil-
dren, and especially ensure they do not bite 
or swallow the battery.

 

If the battery appears to be in an unusual 
condition, seems dirty or presents a strange 
odor, do not use. Faulty batteries should be 
returned to the vendor.

4.2.2  Notification

 

The battery should not be left in direct sun-
light so as to avoid over-heating, distortion, 
smoking or weakening its performance and 
product life.

 

The battery should always be kept away 
from children. do not allow children to 
remove the battery from the pedelec or the 
charger, or to play with it.

 

do not allow the battery to leak on skin or 
clothes. 

 

If touched, rinse off with clean water to 
avoid skin discomfort.

 

If the battery is used in any other technical 
environment, please contact your manu-
facturer for details on how to get the best 
performance, as well as information on its 
maximum current and fast charge conditions 
and any special applications.

 

do not microwave or use in any other cook-
ing appliance.

 

distance the battery from cell phones or 
chargers if it is hot to the touch, leaking or 
odorous, and dispose of it. Faulty batteries 
will cause over-heating, smoking or burning.

 

do not touch a leaking battery. Leaking 
electrolytes can cause skin discomfort. If 
this battery acid comes into contact with 
the eyes, do not rub and immediately rinse 
with clean water then go to hospital for 
treatment.

 

Note: If the battery is completely discharged, 
charge it as soon as possible. Leaving the 
battery uncharged for long periods of time 
will damage its capacity.

Содержание BT C01.340.UART

















































Отзывы: