8
CUSTOMER MANUAL
FRONT HUB MOTOR SYSTEM
4 ELECTRONIC COMPONENTS
In order to prevent a malfunction, the following
instructions should be observed:
•
Operating Temperature: -15 – 60 °C
•
Storage Temperature: -20 – 35 °C
•
Storage Humidity: 30 % – 70 %
4.1 Important Instructions
The electrical system of your Pedelec is very
powerful. If you notice any damage to the
electrical system, remove the battery
immediately. After a fall or accident, live
components may be exposed. If you have a
question or problem, please contact your dealer.
A lack of expertise can lead to serious accidents.
Before performing any work on your
Pedelec, disconnect the electrical system
and remove the battery.
do not clean the Pedelec with a steam jet,
high-pressure cleaner or water hose. Water may
seep into the electrics or drive and destroy the
equipment.
The operating temperature should be between
-15°C and +60 °C. The recommended storage
temperature is between -20 °C and +35 °C
Only perform operations described in this
manual. do not interfere with or modify the
system. No modules may be disassembled or
opened. If in doubt, always contact a specialist
dealer.
Replace parts that are defective or worn, such
as the battery, charger, cable, with original spare
parts produced by the manufacturer or parts
recommended by the manufacturer. Otherwise,
the warranty and/or manufacturer's warranty will
be voided. If non-original or incorrect spare parts
are used, the pedelec may not function correctly.
In the event of a defect, contact an authorized
dealer who carries out repairs with original spare
parts only.
Improper operation of the drive system and
changes made to the battery, charger or drive
may result in injury or costly damage. In this
case, the manufacturer declines any liability for
the damage incurred. Changes to the electrical
system may result in criminal prosecution. This
may be the case if the maximum supported
speed is modified.
