![background image](http://html1.mh-extra.com/html/bafang/bt-c01-340-uart/bt-c01-340-uart_manual_3408690025.webp)
25
dP C13.UART
CUSTOMER MANUAL
FRONT HUB MOTOR SYSTEM
7.6 Functions Settings
•
Once the Pedelec system is switched ON, to
access the Primary Settings menu, hold both
the UP and dOWN buttons for 2 seconds.
Never change settings while the Pedelec is in
motion.
7.6.1 Unit Conversion "km / mile"
U represents unit settings
•
“1” is for miles, “2” is for kilometers.
•
The default value is “2”.
•
To convert the units, press the UP or dOWN
button to increase or decrease until the
desired setting is displayed.
•
To save a changed setting, hold the MOdE
button for 2 seconds and then exit settings.
Mile and Kilometer Conversion Settings Interface
7.6.2 Backlight Contrast Settings
bL represents backlight contrast settings.
•
These range from 1 to 8; Level.
•
“1” is the lowest brightness.
•
Level “8” is the highest brightness.
•
The default value is “1”.
•
To modify the backlight brightness, press the
UP or dOWN button to increase or decrease
until the desired setting is displayed.
•
To save a changed setting, press the MOdE
button and then access Wheel diameter
Settings.
Backlight Brightness Settings Interface
7.6.3 Automatic Power-Off settings
oFt represents the Automatic Power-Off
Settings.
•
The default value is 5 minutes or as specified
by the owner.
•
To change the basic settings, press the UP or
dOWN button to increase or decrease until
the desired value is displayed.
•
These values range from 0 to 60 minutes. 0
means the display won’t switch off automat-
ically, while 60 means the display will switch
off automatically after the Pedelec has been
parked for more than 60 minutes.
•
To save a changed setting and access the As-
sistance Level Selection interface, press the
MOdE button.
Automatic Power-Off Interface