29
2.6 Safety Directions for Maintenance, Inspection and Assembly Work
It is the user’s responsibility to make sure that all maintenance, inspection and
assembly work is performed exclusively by authorized and qualified experts
sufficiently informed through careful perusal of the Operating Instructions.
The accident prevention regulations must be observed.
Basically, all work on the machine is to be performed while the machine is not
in operation. The sequence for shutting the machine down described in the
Operating Instructions must be strictly observed. Pumps or pump units handling
hazardous liquids must be decontaminated.
Immediately upon completion of the work, all safety and protective equipment
must be restored and activated.
Before restarting the machine, all points contained in chapter 6 ”Initial Start-up”
must be observed.
2.7 Unauthorized Changes and Manufacturing of Spare Parts
Any conversion or changes of the machine may only be undertaken after
consulting the manufacturer. Original spare parts and accessories authorized
by the manufacturer guarantee operational safety. Using non-authorized parts
may void any liability on the part of the manufacturer in case of consequential
damage.
2.8 Unauthorized Operation
The operational safety of the machine delivered is only guaranteed if the
machine is used in accordance with the directions contained in Section 1 ”Ge-
neral” of the Operating Instructions. Limits stated in the data sheets may not be
exceeded under any circumstances.
Cited Standards and other Documentations
DIN 4844 Part 2
Safety marking
Supplement 13
Safety symbols
3.
Transportation and Intermediate Storage
Prolonged intermediate storage in an environment of high humidity and
fluctuating temperatures must be avoided. Moisture condensation may damage
windings and metal parts. Non-compliance will void any warranty.
4.
Description
The plastic pumps of series BADU Eco Touch have been designed to circulate
pool water in combination with a corresponding filter unit. The parts in contact
with the pumping medium are mostly of polypropylene PP, the impeller consists
of PA and thus the parts possess excellent corrosion resistance against the
pool water and the usual chemicals for treatment of the pool water. The pump
housing does not contain any inserts, therefore it can easily be recycled.
