![background image](http://html1.mh-extra.com/html/backyard-products/handy-home-products-marco-series/handy-home-products-marco-series_assembly-manual_3354007014.webp)
12
Attach the 48 x 92-5/8" panel with the rough side up (painted-grid lines side)
with the 48" edge and corner ush to the oor frame
(Fig A)
. Secure panel
with two 2" nails in the corners.
Move to the opposite end. Using the long edge of the panel as a lever move the
panel side-to-side until the top corner is ush to the oor frame
(Fig. B)
.
Secure panel with two 2" nails in the corners.
2
BEGIN
1
3
4
Continue attaching the panel using 2" nails 6" apart on edges and 12" apart inside panel.
Use a chalk line or use pre-painted grid lines to nail into joists under panel.
5/8 x 48 x 92-5/8"
(1,6 x 122 x 235 cm)
PARTS REQUIRED:
Ensure your Á oor frame is square by installing one panel and squaring frame.
120"
(305 cm)
92-5/8"
(235 cm)
12" (30,5 cm) inside panel.
6" (15 cm) edges of panel.
48"
(122 cm)
FLOOR PANELS
x1
Flush
Flush
Grid lines UP
2" (5 cm) x55
Fig. C
DOOR
167-3/8"
(425 cm)
167-3/8"
(425 cm)
(2) Nails
Flush
Fig. A
Flush
at top
corner
edge.
Fig. B
(2) Nails
3/4"
(1,9 cm)
Approximately
1-1/2"
(3,8 cm)
Check the oor frame is square by measuring diagonally across the frame corners. If the measurements are the
same your oor frame is square. The measurement will be approximately 167-3/8" (425 cm)
(Fig. C)
.
DOO
R
FLOOR PANELS NOT INCLUDED.
SEE PAGE 6 FOR PANEL SIZES
AND QUANTITIES.
Содержание HANDY HOME PRODUCTS MARCO Series
Страница 2: ...This page intentionally left blank...