![background image](http://html1.mh-extra.com/html/backyard-products/handy-home-products-marco-series/handy-home-products-marco-series_assembly-manual_3354007013.webp)
11
Put both oor sections together and attach as shown using 3" nails.
5
You have nished your oor frame. Proceed to level and square frame.
FLOOR FRAME
3" (7,6 cm) x40
DOOR
Flush
120"
(305 cm)
116-5/8"
(296 cm)
(4) Nails per side,
stagger pattern.
FINISH
6
FINISH
5
LEVEL AND SQUARE FLOOR FRAME
Before attaching oor decking, it is important to level and square the oor frame.
A level and square oor frame is required to correctly construct your shed.
BEGIN
2
3
4
1
Use level and check the frame is level before applying oor panels.
Check for frame squareness by measuring diagonally across corners. If the measurements are the
same, the frame is square. The diagonal measurement will be approximately 167-3/8" (425 cm).
When the frame is level and square secure one side of frame to the 4x4 runners using one fastener
at ends of each runner. At the opposite end of the frame, secure the frame to 4x4 runners with one
fastener at ends of each runner making sure the frame remains square
(Fig. A)
.
Once the oor frame is level and square fasten the frame at each point the frame contacts the 4x4
runners.
See page 7 for the preferred oor leveling method.
First, secure at ends with
one fastener.
Second, secure at ends
with one fastener.
DOOR
167-3/8"
(425 cm)
167-3/8"
(425 cm)
Fig. A
DOO
R
Содержание HANDY HOME PRODUCTS MARCO Series
Страница 2: ...This page intentionally left blank...