![background image](http://html1.mh-extra.com/html/backyard-products/handy-home-products-marco-series/handy-home-products-marco-series_assembly-manual_3354007034.webp)
32
3
Nail down the bottom plate using two 3" nails
between the wall studs.
Screw through the backwall trim into the top and
bottom plates using one 3" screw
(Fig. E)
.
Screw through the backwall trim using one 3"
screw. Angle screw to hit oor frame
(Fig. F).
Repeat process to secure the left sidewall.
1
2
BEGIN
2" (5 cm) x70
3" (7,6 cm) x16
3" (7,6 cm) x4
SIDE WALLS INSTALLATION
Be sure the measurement between the
panel edge and the trim is the same
along the entire length. Then secure
with one 2" nail in the upper corner
(Fig. C)
.
Nail along the panel edge into the trim
using 2" nails spaced 6" apart.
Nail along bottom of panel using 2"
nails 6" apart. Angle nail to hit oor
frame
(Fig. D)
.
DOOR
Stand right sidewall on oor.
It is important to secure the sidewall in the following order.
DOOR
Center sidewall on oor front to
back.
Rest the top of the sidewall so
the sof t panel overlaps the
backwall panel 3/8"
(Fig. A)
.
Nail the lower sidewall corner to
the backwall trim with one
2" nail
(Fig. B)
.
6"
(15 cm)
6"
(15 cm)
CENTER
2" (5 cm)
Nail
Fig. B
Trim
Fig. D
Fig. E
3" (7,6 cm)
Screw
2x3"
3" (7,6 cm)
Nail
Panel
Same
Measurement
Fig. C
Trim
2" (5 cm)
Nail
DOOR
3" (7,6 cm)
Screw
3/8" (0,9 cm)
OVERLAP
Fig. A
Trim
Panel
SofÀ t
Panel
Fig. F
3" (7,6 cm)
Screw
Содержание HANDY HOME PRODUCTS MARCO Series
Страница 2: ...This page intentionally left blank...