![background image](http://html1.mh-extra.com/html/backyard-products/handy-home-products-marco-series/handy-home-products-marco-series_assembly-manual_3354007018.webp)
16
DOO
R
125"
(317,5 cm)
1/4" (6 mm)
Gap
Gusset
Glue
RAFTERS
2" (5 cm) x96
FINISH
6
Rafters should touch at peak.
Apply glue on gusset and place on rafters.
Nail gusset onto rafter using 2" nails, staggered, as shown.
Repeat steps 1-4 to build three more assemblies.
Flip over rafter assembly and glue and nail gusset to back side.
Unscrew jig and save blocks. Set aside rafters and proceed to building your back wall.
Use Jig to assemble Rafters.
Contact at
peak.
5
4
2
3
BEGIN
¸
1
PARTS REQUIRED:
2 x 4 x 65-7/8" (5 x 10 x 167 cm)
6 x 24" (15 x 61 cm)
x8
x8
CV
Place two rafter halves
CV
on oor jig. You will assemble (4) rafters.
Содержание HANDY HOME PRODUCTS MARCO Series
Страница 2: ...This page intentionally left blank...