Backyard Products HANDY HOME PRODUCTS MARCO Series, Инструкция по сборке

Страница: 40 / 53

38
Move to the opposite end. Using the long
edge of the panel as a lever move the
panel side-to-side until the top corner is
ush to the peak
(Fig. C) and there is 1/4"
measurement to the gable trim (Fig. D) .
You may need to move your backwall to
get the 1/4" measurement. Secure panel
with two 2" nails in the corners.
2
You must square the roof by attaching one panel st. You will use the panels’ long
edge as a lever to bring your roof into square. Commonly known as “racking”.
Roof panels may cause serious injury
until securely fastened.
Attach the 48 x 96" panel with the rough
side up (painted-grid lines side) with a 3/4"
measurement on the rafter
(Fig A) and the
panel ush at the peak (Fig. B) .
Secure panel with two 2" nails in
the corners.
1
BEGIN
2" (5 cm) x152
PARTS REQUIRED:
ROOF PANELS
3/4"
GAUGE
BLOCK
GAA
DOOR
7/16 x 23-7/8 x 48"
(1,1 x 61 x 122 cm)
x2
7/16 x 19 x 96"
(1,1 x 48 x 244 cm)
x2
7/16 x 23-7/8 x 19"
(1,1 x 61 x 48 cm)
x2
7/16 x 48 x 96"
(1,1 x 122 x 244 cm)
x2
1/4"
(6 mm)
Gable
Trim
Fig. D
Flush at peak.
Fig. C
Two Nails
48"
(122 cm)
3/4"
(1,9 cm)
Fig. A
Gauge
Block
Flush at peak.
Fig. B