I N S T A L L A T I O N I N S T R U C T I O N S
☎
US (866) 877-6637 |
☎
CAN (866) 766-3426 | aquascapeinc.com
☎
Contact Us
For more information about our company or products,
please visit our website at aquascapeinc.com or call
US (866) 877-6637 CAN (866) 766-3426.
facebook.com/AquascapeInc
youtube.com/aquascape4
twitter.com/AquascapeInc
Find us on:
LED Color-Changing
Fountain Light Kit
Item #84055
LED COLOR-CHANGING
FOUNTAIN LIGHT KIT
No.
Description
1.
LED Color-Changing
Fountain Light
2.
12-Volt Transformer
3.
Color-Changing
Remote Control
Contents - #84055
Aquascape LED Color-Changing Fountain Lights are developed to provide
an impressive accent to fountains. This instruction manual will guide you
through the proper installation of Aquascape color-changing lighting as
well as recommended maintenance procedures to ensure long-term
effectiveness.
Recommended Products
25' Quick-Connect Lighting
Extension Cable
(#98998)
Safety Information
WARNING:
It is
recommended whenever
working in or near water to
have all electrical devices plugged
into a ground fault interrupter (GFCI)
that has been installed by a licensed
electrician.
• To reduce the risk of electrical shock
or damage to the light, all wiring and
junction connections should be made
per local codes. Requirements may vary
depending on usage and location.
• The power cable should be protected
at all times to avoid punctures, cuts,
bruises, and abrasion.
• Operating the light fi xture outside of the
10.8-15 volt operating range voids the
product warranty and may damage or
shorten the life of the LEDs.
IMPORTANT:
Aquascape,
Inc. is not responsible for
losses, injury, or death
resulting from a failure to
observe these safety precautions,
misuse or abuse of pumps or
equipment.
5
YE
AR
WARRAN
TY
G
A
R
AN
TIE DE CIN
Q
A
N
S
5
1
2
3
Model
LED Color-Changing Fountain Light
Dimensions
1.5" diameter x 2.5"H
Voltage Min-Max/Tensions Min-Max
10.8V-15V
Wattage
2.5±10%
Lumens
20 lm (white)
Kelvin Temperature
3,000 K (white)
Color Rendering Index
70 (white)
Beam Angle Spread
30°
Cord Length
15'
LED Color-Changing Lighting Specs
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifi cations not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
