![background image](http://html1.mh-extra.com/html/backyard-products/16835-w/16835-w_assembly-manual_3343292058.webp)
56
3/4"
(1,9 cm)
Gauge
Block
Fig. A
PARTS REQUIRED:
10' x 16' ROOF PANELS
3
4
7/16 x 27-1/4 x 48"
(1,1 x 69,2,9 x 121,9 cm)
x1
2" (5,1 cm)
x13
Flush
at rafter ends.
Fig. B
Move to the opposite end.
Move the panel side-to-side until the
bottom corner is flush to rafter end
(Fig. B)
.
Secure panel with (1) 2" nail in the corner.
Move the rafter until the panel's edge measures
3/4" on the rafter
(Fig. A)
.
Secure panel with (1) 2" nail in the upper corner.
Install (1)
27-1/4" x 48"
panel flush to
installed panel, and the panel flush to rafter
ends
(Fig. B)
.
Secure panel with (2) 2" nails in the corners.
Move Gable
Move Rafter
Two Nails
3/8"
(1,0 cm)
Fig. C
Flush
Flush
Flush
2" (5,1 cm) Nails
6
5
Fig. D
Maintain spacing between the centers of the rafters and to the outside of the gable frame
(Fig. D)
.
Secure panels with (1) 2" nail in each rafter.
Install (1)
47-7/8" x 48"
panel flush to installed panel, and flush to rafter ends
(Fig. B)
.
Secure panel to the rafter with (2) 2" nails in the corners.
At the opposite end of panel, move the gable until the end-rafter's edge is 3/8" from the edge of panel
(Fig. C)
.
Secure panel with (2) 2" nails in the corners.
NOTE:
Measurements to outside of gable frame.
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
32-5/8"
(82,9 cm)
32-5/8"
(82,9 cm)
27-1/4" x 48"
47-7/8" x 48"
7/16 x 47-7/8 x 48"
(1,1 x 121,6 x 121,9 cm)
x1
Содержание 16835-W
Страница 2: ...This page intentionally left blank...