![background image](http://html1.mh-extra.com/html/backyard-products/16835-w/16835-w_assembly-manual_3343292057.webp)
55
10' x 16' ROOF PANELS
PARTS REQUIRED:
2" (5,1 cm)
x4
3/4" GAUGE
BLOCK
Roof panels may cause serious injury until securely fastened.
1
BEGIN
2
7/16 x 48 x 96"
(1,1 x 121,9 x 243,8 cm)
x1
Flush
3/4"
(1,9 cm)
Gauge
Block
Fig. A
Flush
to rafter ends.
Fig. B
Flush
at rafter ends.
Fig. B
Install all roof panels with the rough side (painted grid lines) facing up.
Move to the opposite end.
Using the long edge of the panel as a lever, move
the panel side-to-side until the bottom corner is
flush to rafter end
(Fig. B)
.
Move the gable until the end rafter's edge is 3/8"
from the edge of the panel
(Fig. C)
.
Secure panel with (2) 2" nails in the corners.
Install (1)
48" x 96"
panel with a 3/4"
measurement on the rafter
(Fig. A)
and the panel flush to rafter ends
(Fig. B)
.
Secure panel with (2) 2" nails in the corners.
Move Gable
Two Nails
3/8"
(1,0 cm)
Fig. C
Two Nails
Содержание 16835-W
Страница 2: ...This page intentionally left blank...