![background image](http://html1.mh-extra.com/html/backyard-products/16835-w/16835-w_assembly-manual_3343292051.webp)
49
UV
3"
(7,6 cm)
Screws
Fig. A
WALL
DOUBLER
UV
UV
NAIL FIRST
2" (5,1 cm)
NAIL FIRST
2" (5,1 cm)
6"
(15,2 cm)
1-1/2"
(3,8 cm)
Measure and
Mark
1-1/2"
(3,8 cm)
Measure and
Mark
WALL
DOUBLER
4
Continue securing panels to rafter with 2" nails spaced 6" apart.
PARTS REQUIRED:
GABLE UNITS
3" (7,6 cm)
x8
x2
Gable Units
2" (5,1 cm)
x46
2
3
1
BEGIN
Continue nailing lower edge of panels to wall doubler with 2" nails spaced 6" apart.
Working inside, secure gable unit with (2) 3" screws angled into each
AF
at an angle
(Fig. A)
.
Measure 1-1/2" down from wall doubler and mark at each side as shown.
Set gable unit on top plate. Fasten with (1) 2" nail on each side.
BE SURE GABLE IS CENTERED ON WALL BEFORE NAILING.
3"
(7,6 cm)
Screws
Содержание 16835-W
Страница 2: ...This page intentionally left blank...