![background image](http://html1.mh-extra.com/html/galvo-shed/gvo1515/gvo1515_assembly-instructions_3293046001.webp)
page 1 -
GVO1515
1.53m L x 1.53m W x 1.98-1.83m H
Sloping Roof GARDEN SHED
Parts list
The following parts are included in your shed:
a. 4 x 1830 x 780mm sheets (Back wall and roof)
b. 4 x Sloping sheets, 2 Left and 2 Right (End walls)
c. 1 x narrow 1980 x 715mm sheets (beside door - Front)
d. 1 x 1920 x 780mm sheets (Door sheet)
e. 6 x “U” channels 1515mm long, (Front & Back and Roof)
f. 4 x “U” channels 1485mm long (Side walls)
g. 2 x “U” channels 1920mm (Door sides)
h. 2 x “U” channels 793mm (Door spacers)
i. 2 x “U” channels 780mm (door tops & bottoms)
j. 2 x 1830mm “L” flashings (roof to side flashings)
k. 2 x 1980mm “Z” shaped door jambs, 1 has “U” channel attached to give this shape
for corner door jamb. (Front)
l. 1 x GALVO Door strap - 310mm long
m. 2 x “Z” channels (Door Brace Kit)
n. 1 pack screws and padbolt &
o. 1 pack of Rivets and hinges.
Caution:
Some parts have sharp edges and should be handled very careful-
ly. We recommend the use of protective gloves and footwear when assembling.
All dimensions are approximate.
You will need these tools to assemble your shed:
·
Battery or electric Drill
·
3.3mm (1/8th inch) Drill bit
·
Screwdriver & Riveter
·
Tape measure & Ladder
Feel free to phone 0800 ENZEMBLE for an installer near you...
Do not attempt to erect shed in windy weather.
·
External Dimensions: 1530mm x 1530mm
·
Internal Dimensions: 1485mm x 1485mm
GVO1515