![background image](http://html1.mh-extra.com/html/backyard-products/16835-w/16835-w_assembly-manual_3343292055.webp)
53
Install (2)
27-1/4" x 48"
roof panels flush to installed panels.
Secure the panels with (1) 2" nail in each bottom corner.
At the opposite (gable) end,
move the gable until the end rafter's edge is 3/8"
from the edge of the panel
(Fig. C)
.
Secure panel with (2) 2" nails in the corners.
Install (1)
47-7/8" x 48"
roof
panel flush to installed panels.
Ensure 3/4" measurement at
top of the (inner) rafter
(Fig. A)
.
Secure the panel to the rafter
with (1) 2" nail in each corner.
6
Flush
Flush
Flush
Flush
Flush
27-1/4" x 48"
27-1/4" x 48"
47-7/8" x 48"
Move Gable
3/8"
(1,0 cm)
Gable
End Rafter
Fig. C
2" (5,1 cm) Nails
7
Maintain spacing between the centers of the rafters
(Fig. D)
.
If necessary, move the gable until the end rafter's edge is 3/8" from the edge of the panel
(Fig. C)
.
Secure panels with (1) 2" nail in each corner and rafter, as shown.
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
24"
(61 cm)
PARTS REQUIRED:
10' x 12' ROOF PANELS
5
2" (5,1 cm)
x15
3/4" GAUGE
BLOCK
7/16 x 27-1/4 x 48"
(1,1 x 69,2,9 x 121,9 cm)
x2
7/16 x 47-7/8 x 48"
(1,1 x 121,6 x 121,9 cm)
x1
3/8"
(1,0 cm)
Fig. D
Gauge
Block
3/4"
(1,9 cm)
Fig. A
Содержание 16835-W
Страница 2: ...This page intentionally left blank...