![background image](http://html1.mh-extra.com/html/backyard-products/16835-w/16835-w_assembly-manual_3343292019.webp)
17
x40
2" (5,1 cm)
PARTS REQUIRED:
Place (1)
48" x 84"
panel on the wall frame, as shown.
Locate the panel 1-1/2" above the top plate.
Use a 2x4 as a gauge block for the 1-1/2" top overhang measurement.
Use the
GAA
gauge block to mark the 3/4" side measurement on the wall stud.
Secure panel with (2) 2" nails in the corners
(Fig. A).
2
Secure panel with 2" nails spaced 6" apart on edges and 12" apart inside panel.
EXAMPLE WALL
Ensure your wall is square by installing one panel and squaring frame.
Move to the opposite end. Using the long edge of the panel as a lever,
move the panel side-to-side until you have a 3/4" measurement on the wall stud.
Secure corner with (2) 2" nails
(Fig. B)
.
3/4" Gauge
Block
x1
3/8 x 48 x 84"
(1 x 121,9 x 213,4 cm )
For squareness maintain 1-1/2"
and 3/4" measurement along panel edges.
BEGIN HERE
3/4"
(1,9 cm)
6"
(15,2 cm)
12"
(30,5 cm)
2x4
TEMP. SPACER
3/4" GAUGE
BLOCK
GAA
WALL PANEL INSTALLATION HINTS & EXAMPLES
BEGIN
1
Angle nail to draw panels
tight at seams.
Install all wall panels with the primed side facing up.
2x4
1-1/2"
(3,8 cm)
3/4"
(1,9 cm)
Fig. A
3/4"
(1,9 cm)
2 Nails
1-1/2"
(3,8 cm)
overlap at top
Fig. B
3/4"
(1,9 cm)
1-1/2"
(3,8 cm)
overlap at top
2 Nails
HINT
Содержание 16835-W
Страница 2: ...This page intentionally left blank...