Bacharach 450 Скачать руководство пользователя страница 22

Страница: 22 / 86

Operation

ECA 450

Instruction 0024-9400

Press

ENTER

key to display the contents of chosen memory location.

Observe that “MEM:nnnn ” (where nnnn denotes the memory location

number) appears in the top line, signifying that the data being displayed

was recalled from memory. Also note that if any Test ID information was

associated with the test data, this information is displayed at the bottom

of the screen. Refer to Section 2.17.8 for additional information on Test ID.

   «MEM:nnnn««««««NGAS«
   O2        4.5 %
   CO         12 ppm

EFF 82.2 %
CO2 9.9 %

   T-STACK   374 °F
   T-AIR      68 °F
   .

.
.

SO2( 3) 1 ppm
xxxx

«MEM:nnnn«««««««««««

PRESS -0.25 inwc
xxxx

Where: nnnn = memory location number

xxxx = test ID information

Tip:

Use < > keys to quickly advance to the top and bottom of screen.

Press ESC to return to Memory Directory screen where another memory

location can be viewed. Or press ESC twice to return to Memory menu

screen.

Содержание 450























































































Результаты поиска

Содержание 450

Отзывы:

Bacharach 450, Инструкция по эксплуатации и обслуживанию, Страница: 22 / 86

Результаты поиска

Содержание 450

Отзывы: