Bacharach 450 Скачать руководство пользователя страница 2

Страница: 2 / 86

Instruction 0024-9400

WARRANTY

Bacharach, Inc. warrants to Buyer that at the time of delivery this Product will be free from defects in material and

manufacture and will conform substantially to Bacharach Inc.’s applicable specifications. Bacharach’s liability and

Buyer’s remedy under this warranty are limited to the repair or replacement, at Bacharach’s option, of this Product or

parts thereof returned to Seller at the factory of manufacture and shown to Bacharach Inc.’s reasonable satisfaction to

have been defective; provided that written notice of the defect shall have been given by Buyer to Bacharach Inc. within

one (1) year after the date of delivery of this Product by Bacharach, Inc.

Bacharach, Inc. warrants to Buyer that it will convey good title to this Product. Bacharach’s liability and Buyer’s

remedy under this warranty of title are limited to the removal of any title defects or, at the election of Bacharach, to

the replacement of this Product or parts thereof that are defective in title.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND ARE GIVEN AND ACCEPTED IN LIEU OF (I) ANY AND

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE: AND (II) ANY OBLIGA-

TION, LIABILITY, RIGHT, CLAIM OR REMEDY IN CONTRACT OR TORT, WHETHER OR NOT ARISING FROM

BACHARACH’S NEGLIGENCE, ACTUAL OR IMPLIED. The remedies of the Buyer shall be limited to those provided

herein to the exclusion of any and all other remedies including, without limitation incidental or consequential

damages. No agreement varying or extending the foregoing warranties, remedies or this limitation will be binding

upon Bacharach, Inc. unless in writing, signed by a duly authorized officer of Bacharach.

Note:

The probe is considered a consumable item and is therefore not covered under the terms of this warranty.

HAZARDOUS AREA WARNING:

This instrument has not been designed to be intrinsically

safe for use in areas classified as hazardous locations. For your safety,

DO NOT

use it in

hazardous (classified) locations.

COMBUSTIBLE/FLAMMABLE GAS WARNING:

This is NOT a safety device. Some flue

gases which this instrument can measure may be combustible/flammable. This instrument

should not be used to monitor combustible flue gases at or above their respective lower

explosive limits (LEL). Immediately correct those conditions in the appliance (e.g. boiler,

furnace…) causing unfired combustible gases before proceeding with the flue gas

measurements.

Register Your Warranty By Visiting

www.mybacharach.com

Notice:

Product improvements and enhancements are continuous, therefore the specifications and information

contained in this document may change without notice.

Bacharach, Inc. shall not be liable for errors contained herein or for incidental or consequential damages

in connection with the furnishing, performance, or use of this material.

No part of this document may be photocopied, reproduced, or translated to another language without the

prior written consent of Bacharach, Inc.

−

BACHARACH® is a registered trademark of Bacharach, Inc. All other trademarks, trade names,

service marks and logos referenced herein belong to their respective owners.

Содержание 450























































































Результаты поиска

Содержание 450

Отзывы:

Bacharach 450, Инструкция по эксплуатации и обслуживанию, Страница: 2 / 86

Результаты поиска

Содержание 450

Отзывы: