Baby Lock Pro-Stitcher Premium BLPS6, Руководство по установке

Страница: 19 / 32

3.12 |
BLPS6 - CJ Installation Guide
www.babylock.com
9. Once again verify that the y-axis gear engages
the blue Flexirack for the y-axis.
• Do this by looking from the back of the
machine between the bottom of the quilt-
ing machine and the top of the carriage. If
necessary, use the manual engagement /
disengagement tool to move the gears so
they engage.
• If horizontal adjustment is needed to ensure
that at least half the white gear and blue Flex-
irack are interlocking, loosen the two screws
that mount the y-axis bracket to the base
plates and push the bracket in the direction
necessary while re-tightening the screws.
• Both screws can be adjusted with the quilting
machine on the carriage. Pull the machine to
the front to access the front screw and to the
rear to access the rear screw.
• Pull the quilting machine to the rear of the
carriage and ensure the rear of the Y-axis
bracket does not collide with the black plas-
tic track retainer on the rear of the carriage.
Adjust the Y-bracket if needed.
Â
IMPORTANT: If necessary, use the manual
engagement/disengagement tool to move
the gears so they engage. Insert the end of
the tool into the hole at the front of the Pro-
Stitcher Carriage.
10. With the power cable unplugged and the motors in the engaged position (use the manual
engagement/disengagement tool if necessary), ensure that as the quilting machine is moved
in both the X and the Y directions, the corresponding gears are rotating as well.