Baby Lock Pro-Stitcher Premium BLPS6, Руководство по установке

Страница: 17 / 32

3.10 |
BLPS6 - CJ Installation Guide
www.babylock.com
To set up the Pro-Stitcher carriage
1. Place the Pro-Stitcher carriage on the frame system with the connectors toward the back
of the frame. Carefully lift the quilting machine and place it on the carriage so the wheels
engage the aluminum carriage tracks, making sure not to set the wheels on top of the stitch
regulator cable. This is easier to do with two people, one at each end of the quilting machine.
2. With one end of the stitch-regulator cable
plugged into the machine’s C-Pod (A, right) and
the middle connector plugged into the quilting
machine’s Y-encoder (B, below), plug the other
end of the cable into the carriage X-encoder (C,
lower right).
3. Attach one end of the harness cable ( see Parts
List, item P ) into the connector on the right side
of the power supply. Tighten the side screws. You
will plug the other ends to the bracket as part of
step 5 when you attach the tablet computer.
4. Two long power cords are utilized, one for the
quilting machine and another for the Pro-Stitcher
carriage.
5. Connect one end of the twelve-foot power cord ( see Parts List, item I ) to the carriage power
inlet and secure the power cord into the Pro-Stitcher carriage by pressing the wire cord
retainer onto the cord (D). The other end will be plugged into the power outlet later on,
after all connections have been made.
D
C
A
B