Baby Lock Pro-Stitcher Premium BLPS6, Руководство по установке

Страница: 13 / 32

3.6 |
BLPS6 - CJ Installation Guide
www.babylock.com
3. Use the carriage as a guide and align the blue
Flexirack with the white gear along the length
of the table (see arrow at right), removing the
pink protective layer and pressing downward on
the blue Flexirack while moving down the entire
length of the table.
4. Double check the alignment of the carriage white gear with the blue Flexirack by rolling the
carriage along the entire length of the table.
5. Trim the Flexirack to length using a knife or wire
cutters. The blue Flexirack does not need to
extend the full width of the table and can be a
couple of inches shorter on both ends.
6. At both ends of the blue Flexirack, use two of the
small metal clamps ( see Parts List, item B ) to
hold the ends firmly in place. The clamps have
a hole through the center and a lip on one end.
The lip should be on the side opposite the blue
Flexirack. Place the clamps where they will be
attached and drill pilot holes using the 3/32-inch
drill bit and then use a Phillips screwdriver to
fasten the clamps on both sides of the Flexirack
to the table.
Lip