Baby Lock Pro-Stitcher Premium BLPS6, Руководство по установке

Страница: 18 / 32

www.babylock.com
BLPS6 - CJ Installation Guide
| 3.11
6. Plug one end of the machine’s power cord into
the quilting machine’s P-pod upper power outlet.
The other end of the machine power cord will
plug into the power outlet later on. Do not plug it
into the wall at this time; it will be plugged into the
power outlet later on after all connections have
been made.
7. The black cables attached to the Pro-Stitcher
carriage should be routed up between the rear
handles and the quilting machine, toward the
right-hand side of the machine (looking at the
machine from the back). Attach the cable clips
(
see Parts List, item J
) and route the cable
accordingly.
8. The small black cable with the black 3-connector
clip should be routed underneath the P-Pod and
snapped into the quilting machine’s Y-encoder.
The cables that run from the carriage up to the
Y-encoder should be clipped into the cable clip
under the rear handlebar to help prevent these
cables from getting caught on the edges of the
carriage.