Baby Lock BLTA, Инструкция и справочник

Страница: 63 / 204

SEWING
Se
wi
n
g Ba
sics
61
2
* If [Reinforcement Priority] of the settings screen is set to
[ON] (page 27), reinforcement stitches are sewn instead of
reverse stitches.
Automatic Presser Foot Lowering Function
and Thread Cutting Function
By setting the machine to automatically raise and lower
the presser foot, sewing operations can be performed
more smoothly.
+
Machine sews
reinforcement
stitches and stops
sewing when
(Reverse stitch
button) is pressed.
(At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.)
Machine sews
reinforcement
stitches and stops
sewing after
completing the stitch
pattern, when
(Reinforcement
stitch button) is
pressed.
(At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.)
(Reverse stitch
button)
(Reinforcement
stitch button)
1
When [Auto Down] is set to [ON], pressing the “Start/Stop”
button or depressing the foot controller automatically lowers
the presser foot (if it is raised) before starting to sew.
2
When [Auto Up] is set to [ON], the presser foot is raised when
stopping sewing.
The presser foot is raised to the height specified for [Presser
Foot Height] (page 27).
When the pivot setting ( ) is selected, the presser foot is
raised to the height specified for [Pivoting Height] (page 27).
3
When [Press to Trim] is set to [ON], pressing (Thread
cutter button) automatically lowers the presser foot (if it is
raised) before cutting the thread. The presser foot will be
raised after the thread is cut.
1
2
3