MANHATTAN Heated Servery Counter
– 40 –
Help in the event of problems
Operation indicator LEDs do not
light up – no mains voltage in
the unit
The "Bain-marie well heater" and
"Heat radiators" operation
indicator LEDs light up but the
food temperature is not
adequately maintained
The "Compartment heater"
operation indicator LED lights up,
but the food is not kept
sufficiently hot
Unit model with heated compartments
Cause
Action
Mains plug is unplugged or not
plugged in properly.
Plug the mains plug into the socket
outlet and ensure proper seating.
Power cable is damaged; e.g. a
wire is broken (can also occur
without external damage).
Have power cable replaced by a
facility authorised to carry out repairs.
Customer-accessible fuse
(household fuse) is defective.
Check the customer-accessible fuse
and have it replaced if necessary.
Unit electrical system is
defective.
Notify a facility authorised to carry out
repairs.
Cause
Action
Setpoint temperature is set too
low.
Set a higher setpoint temperature.
The unit is exposed to a
(strong) draft.
Eliminate cause(s) of draft or remove
unit from draft.
Unit electrical system is
defective.
Notify a facility authorised to carry out
repairs.
Cause
Action
Setpoint temperature is set too
low.
Set a higher setpoint temperature
Section "Switching heating for
compartments on or off and
setting setpoint-temperature" on
page 25.
Unit electrical system is
defective.
Notify a facility authorised to carry out
repairs.
