71
MAG
User Manual v2.0
BATTERY INSTALLATION/REPLACEMENT
1
Insert the battery pack (see 1, Fig. 95) into the
battery holder (see 2, Fig. 95) so that the power
cable (see 3, Fig. 95) comes out of the bottom
of the holder.
When inserting the battery pack, be careful to
match the grooves on the battery to the anti-
rotation stops provided on the holder.
2
Connect the battery pack (see 1, Fig. 96) to the
electronic board of the converter (see 2, Fig. 96)
by inserting the 5-ways connector (see 3, Fig.
96) to the relative counterpart.
3
Insert completely the battery pack (see 1,
Fig. 97) inside the appropriate housing of the
converter (see 2, Fig. 97).
Make sure that the O-ring seal positioned on the
cover thread (see 3, Fig. 97) is in its place and in
good condition (if necessary, replace it).
4
Put on the cover (see 1, Fig. 98), close the battery
pack and screw it to the end of the stroke by
pressing lightly the O-ring seal to guarantee the
insulation.
5
Only in case of battery replacement, confirm the
replacement by clicking the item “new battery”
accessible from the menu “MEMORY.”
Fig. 95
Fig. 96
Fig. 97
Fig. 98
