To add an Incoming IP filter:
1. Click the
Add
button.
2. Input the preferred
Filter Name.
3. Determine the
IP Version
that the filter will use.
4. Select the
Protocol.
5. Enter the
Source’s IP Address
, and
Source Port
.
6. Input the
Destination IP Address
and
Destination Port
7. Select a WAN Interface/s where the filter will apply
8. Click
Apply/Save
button to save changes.
To remove an Incoming IP filter
1.
On the Filter table, tick the checkbox that corresponds to the Filter Name that
you wish to remove.
2.
Click Remove to remove the filter.
