Remove/ Disable Conflicts
To ensure that the router installation moves on smoothly, you need to remove or
disable conflicts that may interfere with the installation. Probable conflicts may
include:
Internet sharing applications
Proxy software
Security software
TCP/IP settings
Internet properties
Temporary Internet files
Internet Sharing, Proxy, and Security Applications
Internet sharing, proxy software, and firewall applications may interfere with the
router installation. These should be removed or disabled before starting the
installation. If you have any of the following or similar applications installed on your
computer, remove or disable them according to the manufacturer’s instructions.
If you have any of the following or similar applications installed on your computer,
remove or disable them according to the manufacturer’s instructions.
Internet Sharing
Applications
Proxy Software
Security Software
Microsoft Internet Sharing
Win Gate
Symantec
WinProxy
Zone Alarm
Configuring TCP/IP Settings
Check if your computer uses the default TCP/IP settings. Follow the steps below to
check the TCP/IP properties:
1. Select
Start > Run
. The Run dialog box would appear.
2. Enter
control ncpa.cpl
on the input box, and then click the
OK
button. This
would open the Network Connections window in your computer.
3. Right-click
LAN
and then select
Properties
. The Local Area Connection
Properties dialog box would appear.
4. Select
Internet Protocol (TCP/IP)
and then click
Properties
. The Internet
Protocol (TCP/IP) dialog box would appear.
