D.
Modify Wireless
Allows you to modify your Wireless Network Name/Service Set Identifier (SSID) and
Network Key (Password). In this page, you can also set to Enable or Disable the
Smart AP Steering. If you do not wish to make any modify your wireless settings, you
may click Skip. By default, Smart AP Steering is
Enabled
.
Smart AP Steering - Enabled
When Smart AP Steering is Enabled, you will only see one SSID in the Wi-Fi list of your
device. This feature enforces your dual band wireless devices to automatically
connect to the AIR-706P’s 5.0GHz frequency band or to roam to 2.4GHz frequency
band when needed.
To configure the Wireless Settings when Smart AP Steering is
Enabled
;
1.
Click on Show Password (This is to uncensored the password in the Password
field)
2.
You may designate an
SSID or a Wireless Network Name
for your wireless
network or use the default SSID of your AIR-706P.
3.
You may designate a Network Password for your wireless network.
4.
Click Next
NOTE: The
Default SSID
and
Network key
for your AIR-706P can be seen on the
device label sticker of your device.
