When Smart AP Steering is
Disabled
, the Right column will display as below.
To configure the 2.4GHz of the Wireless Setup;
1.
You may set the 2.4GHz frequency band to Enabled/Disabled. Once
Disabled, the 2.4GHz SSID
will not
be visible.
2.
You may designate a new
SSID or a Wireless Network Name
for your 2.4GHz
wireless network.
3.
Select a
Channel
. By default, the channel is set to
Auto.
NOTE: It is highly recommended to select
Auto
mode as your router’s Channel
setting. This enables your router to continuously use the least congested Wi-Fi
channel at all times.
4.
Select an
Authentication mode
on the drop down list. It is highly suggested to
use
Mixed WPA2/WPA-PSK
as its authentication.
5.
You may designate a new
Network Password
for your 2.4GHz wireless network
6.
Click Apply
7.
To reset to original settings, click Reset
