To configure your router’s Access Time Restriction;
1.
Click Add
2.
Your page will be redirected to this page:
3.
Assign a Rule Name
4.
Select the MAC Address of the device you wish to restrict.
1.
My Device MAC Address
refers to the device you are using to access
the Web Interface
2.
Other MAC Address
refers to the other devices connected to the
network. Use the dropdown list to view the list of connected devices
5.
Select the day(s) of the week you wish to restrict the client
6.
Set the Start Blocking Time
7.
Set the End Blocking Time
8.
Click Apply
NOTE: To find out the MAC address of a Windows based PC, launch command
prompt and type
ipconfig/all
URL Filter
By default, none of the URL list type is selected. When
Exclude
is selected, this means
that any URL listed are blocked or not accessible by any clients. When
Include
is
selected, this means that any URL listed in the list is the only URL that can be
accessed by the clients. Any URL not listed in the
Include
list is blocked.
NOTE: Only HTTP websites are supported
