Azbil ARF200, Руководство по эксплуатации

Страница: 70 / 146

62
“System settings” is selected for “Filter level,” the filter level will be determined by the settings in
System settings > Other.
Note: Setting the filter level is possible only in version 2.00 and later.
■
Tag (label)
• A tag can be displayed instead of the channel number. (Up to 15 one-byte characters)
This is valid when data display of [Display settings] → [Common parameters] is set with tags.
■ Units
• Set the engineering units for the channel. (Up to 7 one-byte characters)
■
Usage of formula
OFF Raw input data is displayed and recorded for this channel.
ON Input data processed by a formula is displayed and recorded for this channel.
■
Definition of formula
• If the formula usage setting is ON, define a formula for the channel (see 11.2.2 below).
■ Copying parameters with the copy function
The above shows the setup for copying parameters from Ch 01 to Channels 02 to 05. Select the Go
button and press [ENTER] key, and the Channel 01 parameters are copied to Channels 02, 03, 04,
and 05.