Ayrton icecolor 250 Скачать руководство пользователя страница 9

9

USER MANUAL

  |  ENGLISH

Factory mode (Default Mode)

DMX address = 1
MODE = 4 channel
Dimmer = Inverted
Light Mode = Entertainment
Constant Color = OFF
AUTO mode = all OFF
Wireless DMX output = disable

Icecolor menu

 - option details 

LUMINOSITY Modes

This menu allow to adjust the luminosity of the device. 
There are 2 distinct modes in ICECOLOR:

ENTERTAINMENT Mode

This Mode allow to gain the best from the device’s light 
output power, depending on the outdoor temperature 
conditions. When the ICECOLOR is cold, the available 
power is at a maximum. If the temperature increases 
too much, the ICECOLOR will gradually reduce its 
power to guarantee its thermal regulation. This Mode 
is recommended for temporary events where the light 
output of the ICECOLOR must be optimum.

ARCHITECTURAL Mode

This Mode guarantees a stability of the device’s luminous 
flux, in return for a less high luminous flux than for the 
‘Entertainment’ Mode. This mode is recommended in the 
context of fixed-place installations of the ICECOLOR where 
the consistency of the flux is important. It is also advisable 
to use this Mode in the case where the ICECOLOR is very 
often set at values close to 100% of its power.

CONSTANT COLOR Mode

This menu allow to regulate the consistency of the colour 
generated by the ICECOLOR. 
This mode makes it possible to avoid the phenomenon 
of a gradual deterioration in colour observed generally on 
projectors equipped with LED light sources, which occurs 
when the device heats.
This Mode can be activated or deactivated in the ICECOLOR, 
which produces the following effects:

CONSTANT COLOR ON Mode

In this Mode, the device’s internal software automatically 
compensates for the phenomenon of the deterioration of 
the colorimetry which occurs when the device becomes 
hot with use, thus preserving the colours adjusted when 

this was cold. In return, when the CONSTANT COLOR 
Mode is activated, the device’s general luminosity is 
likely to reduce. This Mode is recommended when the 
device is intended to light up a given target in a preset 
colour (or with a slow change of colour) together with 
other projectors of the same type for a long period. By 
nature, this mode is particularly suited to the constraints 
of Architectural lighting.

CONSTANT COLOR OFF Mode

The function is deactivated and no compensation of 
colorimetry depending on the temperature is activated. 
The quantity of light available with ICECOLOR is maximum 
when this function is deactivated, but the nature of the 
colours configured on the device is likely to deteriorate 
when the device heats (this is because the Red LEDs 
significantly lose efficiency as the temperature increases). 
This traditional mode is recommended for event lighting 
and the majority of temporary lighting uses, where the 
maximum quantity of light is favoured.

AUTO Modes

This menu offers several functionalities which allow to use the 
ICECOLOR without DMX lighting controller.
It is possible to drive the ICECOLOR directly from its integrated 
control panel, while using one of the two integrated AUTO 
Modes. It is therefore possible to configure the projector 
light output to a static colour, or also to activate a variation 
of a pre-recorded dynamic colour whose transition speed is 
adjustable (via the CONFIG menu).
The triggering of one of these AUTO Modes can be 
parameterised (via the ACTIVATE Menu).

CONFIG

This menu allow to adjust the light levels of the STATIC 
AUTO Mode, or to regulate the passing speed of the 
DYNAMIC AUTO Mode.
Important: the last Autonomous Mode modified or 
selected by the user will be triggered by the ACTIVATE 
Menu.

 

STATIC Mode

This menu makes it possible to adjust a static colour on 
the device.
The intensity of each colour present on the device 
can be adjusted separately and a general Dimmer 
makes it possible to adjust the general level of the 
device’s luminosity. The principle of this menu involves 
successively adjusting the level of each of these colours 
of available LEDs in order to obtain the final colour 
desired and then to adjust the general Dimmer.

 DYNAMIC Mode

This menu allow to adjust the passing speed and the 

ICE COLOR MENU

Содержание icecolor 250





























Отзывы: