37
Update Error
If an error is detected during a firmware update process,
this fault will be displayed.
Please try to update the unit again using the USB
Firmware update method (page 25).
If the unit has become unresponsive, or if network
functionality has been impacted, the update error may
have critically impacted the system
and must be taken to
an authorized Ayre dealer for repair.
I
n the event that any fault persists, or if another issue
occurs but is not displayed, please contact your Ayre
dealer for further assistance.
If the EX-8 cannot be seen by devices on your home
network or if playback is inconsistent, the following
steps may help.
If you are using a wireless connection, try connecting the
EX-8 with an Ethernet cable to see if that resolves the
problem.
Visit the “Network Info” page in the setup menu (page
23) and verify that the EX-8 has been assigned an IP
address on your home network. If both the “LAN IP”
and “WLAN IP” fields are blank, or zeroes, there may be
a connection issue between the EX-8 and your home
network. Try reviewing the connection steps (page 28).
Network Connection Issues
Persistent Faults
