13
System-sleep mode reduces
the power consumption of
the EX-8 without turning it
off completely.
Operation
Active mode provides
power to the audio circuit
and enables the system for
listening.
The following chapter details operation of the EX-8. On
the front of the unit, you will find two buttons, a status
LED, a display, an IR receiver for the remote, and a
volume knob. In addition to these controls, some
network applications can provide further integration
with the unit.
When first turned on, the EX-8 automatically enters
System-sleep mode, indicated by a green status LED.
The amplifier’s audio circuitry is disabled, reducing the
amount of power it draws. To activate the unit, simply
press the left-hand button on the front of the unit, or the
power button on the remote. If either button is held for
three seconds, AyreLink connected devices will also be
turned on.
Once in Active mode, the audio circuitry in the unit is
enabled. The currently selected input is displayed on the
screen and any signal present at that input will be driven
to the enabled output(s). When available, information or
meta-data from a digital recording being played will be
shown on the EX-8’s display.
System-sleep Mode
Active Mode
Controls and
