11
The two 3.5mm connectors on the left will allow you to
listen to headphones in balanced mode. These outputs
are not compatible with single-ended headphones.
Headphones with a 3.5mm stereo connector can
be used with the EX-8 by using a ¼” to 3.5mm
adapter.
Only use headphones with stereo phone plugs
(two insulating rings). Mono phone plugs
(single ring) may damage the unit. Four
conductor (three rings) plugs may not
connect properly, distorting the sound
.
The EX-8 automatically detects when headphones are
plugged in. The loudspeaker and preamp outputs are
disabled while the headphone outputs are active.
All outputs on the EX-8 share a common
volume control. Exercise caution when
connecting headphones, as ‘nominal’ volume
levels vary.
The AyreLink communication system provides a
convenient way to control your audio system. There are
two AyreLink ports on the rear panel of the EX-8. Each
port has four contacts and contains both an input and an
output. Both ports function identically and may be used
interchangeably.
Be sure to use two-line telephone cords to
make AyreLink connections. These can be
identified by the four gold contacts on each
connector.
AyreLink Ports
For improved stack
integration, try connecting
your Ayre equipment
together with AyreLink.
3.5mm Headphone Jacks:
Balanced
