6
The Ayre EX-8 is easy to set up and use. The following
guidelines will ensure the installation goes smoothly.
At this point, you should consider how you would like
to use the EX-8 in your system and how to incorporate
your other equipment.
In this section, you will find descriptions of the various
connections that are available on your EX-8, as well as
recommendations for their intended use.
A good location for the EX-8 is in an open-backed
cabinet or on a shelf. The amplifier section produces a
moderate amount of heat during operation. Be sure to
provide at least three inches (75 mm) of air space
above the amplifier.
An adequate supply of air flow will avoid
overheating the amplifier.
The receiver for the remote control is between the two
front panel buttons. A line of sight from the listening
position will ensure maximum range.
Connection and
Do not stack the Ayre EX-8
directly with other components,
as this may restrict the air flow
or induce hum into the audio
circuitry.
The infrared beam will travel
through glass.
Location
Installation
