User’s Manual
Configuring the Document Server
63
2.
Specify a descriptive name for the file destination in the Destination
Name field. This is the name that will appear in the destination list.
3.
From the drop-down Profile list, select the profile to be used as default
for this destination.
Note:
4.
With reference to the table below, select the amount of information
to be included with the image:
5.
Specify the name or IP address of the FTP server on which the scanned
image will be stored in the FTP Server field.
6.
Specify the user name for logging on to the FTP server in the User
field.
Note:
7.
If required, specify the password for logging on to the FTP server.
Repeat the password in the Confirm field to check the spelling and
syntax.
The user can specify another profile from the AXIS 7000 control panel at the moment of
scanning. <Default-xx> is the default value specified on the Destination Defaults page.
Option
Description
<Default-xx>
Default value specified on the Destination Defaults page
<Complete>
Information about the AXIS 7000, the connected scanner device, the
parameter settings used when scanning etc.
<Basic>
Includes the image-related profile settings
<None>
Does not include any information
Leaving the User field blank causes the user and password defined in the Destination
Defaults page to be used.
