User’s Manual
Basic Installation
27
11.
Press Select
to edit the subnet mask:
12.
To change the value, repeat steps 4 - 6 above.
13.
Press Menu
to display the node address. This address is not
editable. The node address should equal the Document Server serial
number found on the underside label of the unit.
14.
Press Menu
once more to display the final instructions:
15.
Press Select
to exit the IP settings. The Document Server then
completes the startup sequence.
16.
Write the name or IP address of the Document Server on the supplied
Instructions label and attach it to the top cover.
The Document Server is ready for use when the Status indicator stops
flashing and remains lit.
Note:
Verifying the
Network Settings
Access the
Advanced
menu from the Document Server control panel
to verify that the chosen network settings are correct, as described
below:
1.
Press and hold down the Menu key
while simultaneously
pressing the Select key
. The
Advanced menu
is displayed
.
2.
Use
to find the
Network Settings
option.
3.
Press Select
to enter the submenus.
4.
Use
to scroll through and check the parameter settings.
Edit net mask:
000.000.000.000
Press
if you
are finished
If you make a mistake while editing the parameters, press the
Cancel
key on the control
panel to cancel the operation.
. .
...
.
.
