AVTECH Inc.
11
TemPageR 3E
Configuration And Setup Screens
email address, formatted in a way defined by the service provider being used for the target mobile device.
For example, Verizon’s email address format for sending an email alert to a mobile device using SMS
text messaging is ‘
<10 digit mobile device number>@vtext.com
’ with ‘<
10 digit mobile device number
>’ being
replaced by the area code and phone number of the mobile device without dashes, spaces or a ‘1’ in front
of the area code.
If the specific format for your service provider is not known, AVTECH provides a database in the
‘Support’ section of the
AVTECH.com
website that contains the email-to-SMS format for many available
service providers. This is the largest database of this type on the web. However, if your service provider is
not listed, please contact them by phone for the proper format and be sure that the mobile device being used
has text messaging capability enabled. If you learn of a new or changed format, please email this with your
contact information to
so we may confirm it and post it online for the convenience
of other users.
SNMP
The TemPageR 3E unit is fully SNMP compliant and can be monitored by applications capable of performing
an SNMP Query or Get request. The TemPageR 3E unit can also be configured to send SNMP Traps to up
to three separate IP addresses when thresholds are exceeded. If another application is used to monitor the
TemPageR 3E unit, be sure to obtain the MIB files for the TemPageR 3E unit from the ‘Downloads’ section
of the
AVTECH.com
website or the most recent AVTECH Update CD.
SNMP Queries (SNMP Get)
SNMP Queries or Get requests are performed by a SNMP enabled software application to retrieve
specific information from an SNMP compliant device on the network. The query or request will be
sent to the IP address of the TemPageR 3E unit using a SNMP community name on UDP port 161. The
SNMP community name in use for that device or network must match the name in the ‘SNMP Read
Community Name’ field on the ‘SNMP’ tab of the ‘Settings’ screen. If use of a third party application is
desired, the SNMP protocol used must be version 1 and the MIB files for the TemPageR 3E unit must be
loaded properly in the software application in order to retrieve the SNMP MIB Objects that will return