AVTECH Inc.
3
TemPageR 3E
Installation
Installation
The initial installation of the TemPageR 3E can be completed quickly and easily provided the
instructions below are followed with detail and care. Before beginning, please lay out the contents of the
TemPageR 3E package so that the components can all be located and accessed with ease.
Package Contents
The main components included with the standard (default) TemPageR 3E package include:
• One (1) TemPageR 3E ID Box (1U 19˝ Mounting Bracket Is Included w/TemPageR 3ER)
• One (1) Ethernet Cable (10’ length, blue)
• One (1) AVTECH 5v 1A Power Adapter (110-240v, 50-60Hz, RoHS)
• One (1) External Digital Temperature Sensor
• One (1)
TemPageR 3E User’s Guide & Reference Manual (You’re Reading It!)
• Download Access To TemPageR 3E Firmware, Software & SNMP MIBs (No CD Media Is Provided)
• Twelve (12) Months Of Maintenance, Support & Update Service (MSUS)
• Literature & Additional Information
NOTE: Some of the components arriving with this package may be individually wrapped and contain additional supporting
components. Please remember to keep these components together as they will be required for proper setup. If you received
additional components (i.e. like additional sensors) that are not mentioned above, instructional material explaining the proper
setup of that component should be included with it. If you cannot find the proper instructional materials, check the included CD or
‘Support’ and ‘Downloads’ sections of the AVTECH.com website for any appropriate installation or application note that will instruct
you on the proper installation and use of that component. Install those components after the TemPageR 3E setup is completed.
TemPageR 3E ID Box
The graphics below identify the primary components of the TemPageR 3E ID box that are visible on the
front and rear panels.
A
B
C
Front View (TemPageR 3E ID Box)
A.
Main Power Port
— Connect the ‘AVTECH 5v 1A Power Adapter’ to this port to power the
TemPageR 3E unit. Do not use any other power adapter or it could damage the unit.
B.
Network Port
— Attach the TemPageR 3E unit to the network by plugging the Ethernet
cable into this port and then connecting the other end to the network. The left LED above the
‘Network’ port indicates Link status and should light up and remain a solid green or orange color.
The right LED above the ‘Network’ port indicates Activity status and should blink with network
activity on the port. The color of this LED can be green or orange as well. When the device
reboots, the Link LED will turn on and off several times. If the Link LED remains unlit and the
